|
 Concept2 oarlocks are shaped for easy oar handling with positive stable positioning on both drive and recovery. Oarlocks are sold with replaceable bushings for pitch adjustment and pin fit. Made of unbreakable "Supertough" nylon with stainless steel gates, they meet FISA standards for oarlock turning diameter.
Pin diameter must be specified at the time of order. Different colored bushings fit different pin diameters as shown in the table below.
| Bushing Color |
Sweep |
Scull |
| Black |
9/16" |
1/2" (w/adapter*) |
| Blue |
13 mm |
13 mm |
| White |
1/2" |
7/16" | *Adapter for "crescent" type scull backstand fits
into black 1/2" scull bushing.
5°-3°
Bushings
Qty 4 |
6°-2°
Bushings
Qty 4 |
7°-1°
Bushings
Qty 4 |
4°-4°
Bushings
Qty 4 | Each wire "rake" holds a complete set of 16 bushings.
There are 4 of each pitch, enough for 2 oarlocks.
|
Order Form Oarlock and C.L.A.M. Order Form
(US and Canada)
Instructions
Instructions for Using the Bushings
to Adjust Pitch
Adjust oarlock pitch from 1 to 7 degrees by selecting two bushings with the desired pitch imprinted and inserting them in opposite directions as shown in the drawing. (If replacing existing oarlocks, keep in mind that most non-adjustable oarlocks have a built-in pitch of 4 degrees.) |
